Archive for Knitted Craft Project

Passap E600 Christmas Knitted Key Fob


fullsizeoutput_729

DSCF5153

Measures 14 inches total length

snowflake

Sorry I have not been knitting. I went off into a sewing tangent. lol  I made a quilted Christmas tree skirt so that I won’t be rushing to do it in the last few weeks before Christmas .  I finished a large autumn table quilt also. My latest project was mug rugs and key fobs. When I made the key fob I  thought, okay, this could be knitted also. This took about 15 minutes to make. The snowflake is the first one I did. I have a picture of the snowflake you would enter into your knitting program for downloading. Then I went and looked in the pattern book and there are many designs to choose from. More on that later.

First I found a small snowflake design . I knew I could not have many stitches to make a one inch width. I looked at my knitted strip of all the techniques that I have and technique 184(long stitch) looked the best for less distortion. Both end needles will be on the front bed.  I cast on  9 stitches (fb) and 8 stitches (bb) double bed with 2 strands of 2/24 at tension 1../1.. I hung a small comb and two weights….yes, two green weights! I used 2../2.. for CX rows. Then tension 3 for last N/N row and for the main tension. I knit 8 rows of solid red before downloading and knitting the pattern .  I knitted on needles 60 R and 68 R so that my work was close to the color changer. I knitted 392 rows . (total of 14 inches)I turned off console and knitted 8 rows of red to finish. I took off on waste yarn and kitchener stitched the top so I would not have a lot of bulk to go inside of the metal clamp. I also had my mast tension on 5.5 for number one and 6.5 for number 2. Since all machines are different, if the eyelet pops out of the holder while working, your mast is too tight. lol Then I just put the two ends into the metal clamp and closed .

If you don’t want to do the snowflake design, just look in your stitch book for small designs that are the width of the band(9 stitches) For example, pattern 1126 is the design in the top picture of the key fob. It was 7 stitches wide and 7 rows. I entered the design in win/crea and added two columns, one on each side.  If you want to do pattern 1304, you only have to add one blank column since there is one blank column in the pattern. You can even go to 10 stitches wide and be safe it will fit in the metal closure.

Also, if you don’t want to buy the metal one , you can start this on waste yarn and end on waste yarn. Before joining , put in a key ring circle. Then graft your stitches and sew a line just below the ring through both thicknesses so that the circle is closed. Okay, now back to sewing. hahaha

Passap Halloween Mug Rugs


dscf2953

 

dscf2957

I made some mug rug designs in case you don’t want to do the larger placemats. I love these because I can just throw them in the washing machine if they get dirty and they don’t take any space to store until the next year.

Note: In my place mat instructions I did not mention at the end to latch tool bind off the stitches that are on waste yarn starting at the end without the yarn tail. I was assuming everyone would know how to do this.

You can find the instructions in my drop box link.

https://www.dropbox.com/sh/776mzn2ch7wvzyi/AAANC08RRuAv_3ofx2KFB7jHa?dl=0

Passap Halloween Placemats


dscf2924

dscf2937

Halloween is just around the corner so I decided to make some placemats. The pumpkin placemat will have my candy bowl on it for the trick or treaters along with the little witch lady I machine knitted using the Brother machine.
I made the witch placemat first and it really needs more color in it. I am happy with the pumpkin one though.
It took me FORRREVVVVVVER to get the distortion out of my designs. You are welcome to use these for your personal use but not to sell them as your pattern. I have written out the instructions on how to make these. They are around 10.5 inches high by 14 inches in width . I used 2/24 yarn and technique 183. On the directions for the pumpkin placemat I walk you through the whole process of downloading to knitting. I always do my cast on before I turn the console on. On the witch placemat it just gives the directions for the placemat. Both are the same but one has all the details.These patterns are odd numbers in width so you must center the design by programming 1- (minus) in the set up.
The information and both files are in my drop box link below.

https://www.dropbox.com/sh/1kb2ybidrwfkh9c/AABoVbQp-DWGk2whHaKYgZUNa?dl=0